全球鋼材百科網
      NiCr20TiAl簡介

      NiCr20TiAl,及該型號鋼材的基本信息、化學元素成分、機械性能、力學性能、熱處理溫度、同等型號參照表等

      NiCr20TiAl

      NiCr20TiAl,及該型號鋼材的基本信息、化學元素成分、機械性能、力學性能、熱處理溫度、同等型號參照表等

      基本信息:
      分類 種類 型號 標準 國家 應用
      Steel Grades - NiCr20TiAl
      化學成分信息(mass fraction)(wt.%) of the NiCr20TiAl
      元素名稱 最小值 最大值 近似值
      Fe - 1.5000 -
      Ti 1.8000 2.7000 -
      Cu - 0.2000 -
      Co - 1.0000 -
      Ni 65.0000 - -
      Cr 18.0000 21.0000 -
      B - 0.0080 -
      Al 1.0000 1.8000 -
      S - 0.0150 -
      P - 0.0200 -
      Mn - 1.0000 -
      Si - 1.0000 -
      C 0.0400 0.1000 -
      Ti 1.8000 2.7000 -
      Si - 1.0000 -
      S - 0.0150 -
      P - 0.0200 -
      Ni 65.0000 - -
      Mn - 1.0000 -
      Fe - 1.5000 -
      Cu - 0.2000 -
      Cr 18.0000 21.0000 -
      Co - 2.0000 -
      C 0.0400 0.1000 -
      B - 0.0080 -
      Al 1.0000 1.8000 -
      Ti 1.8000 2.7000 -
      Si - 1.0000 -
      S - 0.0150 -
      P - 0.0200 -
      Ni 65.0000 - -
      Mn - 1.0000 -
      Fe - 3.0000 -
      Cu - 0.2000 -
      Cr 18.0000 21.0000 -
      Co - 2.0000 -
      C 0.0400 0.1000 -
      B - 0.0080 -
      Al 1.0000 1.8000 -
      Ti 1.8000 2.7000 -
      Si - 1.0000 -
      S - 0.0150 -
      P - 0.0300 -
      Ni 65.0000 - -
      Mn - 1.0000 -
      Fe - 3.0000 -
      Cr 18.0000 21.0000 -
      Co - 2.0000 -
      C - 0.1000 -
      B - 0.0080 -
      Al 1.0000 1.8000 -
      Ti 1.8000 2.7000 -
      Si - 1.0000 -
      S - 0.0150 -
      P - 0.0200 -
      Ni 65.0000 - -
      Mn - 1.0000 -
      Fe - 1.5000 -
      Cu - 0.2000 -
      Cr 18.0000 21.0000 -
      C 0.0400 0.1000 -
      B - 0.0080 -
      Al 1.0000 1.8000 -
      Ti 1.8000 2.7000 -
      Si - 1.0000 -
      S - 0.0150 -
      P - 0.0200 -
      Ni 65.0000 - -
      Mn - 1.0000 -
      Fe - 1.5000 -
      Cu - 0.2000 -
      Cr 18.0000 21.0000 -
      Co - 1.0000 -
      C 0.0400 0.1000 -
      B - 0.0080 -
      Al 1.0000 1.8000 -
      Ti 1.8000 2.7000 -
      Si - 1.0000 -
      S - 0.0150 -
      P - 0.0200 -
      Ni 65.0000 - -
      Mn - 1.0000 -
      Cu - 0.2000 -
      Cr 18.0000 21.0000 -
      Co - 1.0000 -
      C 0.0400 0.1000 -
      B - 0.0080 -
      Al 1.0000 1.8000 -
      機械性能信息:
      屈服強度Rp0.2(MPa) 抗拉強度Rm(MPa) 沖擊率 伸長率 斷面收縮率 熱處理狀態 布氏硬度(HBW)
      285 (≥) 726 (≥) 12 41 23 Solution and Aging, Annealing, Ausaging, Q+T,etc 413
      物理性質信息:
      溫度 彈性模量 系數 熱導率 比熱容量 比電阻率 密度 加權系數
      32 - - 0.32 -
      119 376 - 34.3 231 -
      622 - 42 32.2 421 321
      熱處理信息:
      Heat treated : 1544°C - 1427°C
      對照表(同等等級)信息:
      型號 標準 國家 應用
      Y1Cr18Ni9 Improve the machinability, ablation resistance. Suitable for automatic lathe production of bolt and nut
      1Cr18Ni9 High strength after cold forming, but elongation than 1 cr17ni7 slightly worse. Used in architectural decoration parts
      1Cr18Mn10Ni5Mo3N Of urea with good corrosion resistance, can produce urea corrosion of the equipment.
      1Cr17Ni7 High strength after cold forming. Used in railway vehicle, conveyor belt, bolt and nut, etc
      Y1Cr18Ni9Se Improve the machinability, ablation resistance. Suitable for automatic lathe production of rivets, screws
      0Cr18Ni9 Seamless stainless steel tubes for boiler and heat exchanger
      00Cr19Ni10 Carbon content lower than 0Cr19ni9 steel, excellent intergranular corrosion resistance, is used for welding after the class is not processed parts
      1Cr17Mn6Ni5N Nickel steel grade, instead of number 1 cr17ni7 and magnetism after cold working, used in railway vehicle, etc
      1Cr18Mn8Ni5N Nickel steel, instead of 1cr18ni9
      0Cr19Ni9N Based on 0cr19ni9 plus N, strength increase and the plastic is not down. Reduce the thickness of the material. As a structure with strength components
      0Cr19Ni10NbN Based on zero cr19ni9 plus N and Nb, with better than 0 cr19ni9 properties and USES
      00Cr18Ni10N In 00cr19ni10 adding N, on the basis of the above grades also features, use the same as the 0 cr19ni9n, but better intergranular corrosion resistance
      1Cr18Ni12 Compared with 0 cr19ni9, processing low hardenability. Used for spinning processing, special drawing, cold heading
      0Cr23Ni13 Corrosion resistance and heat resistance are better than 0cr19ni9
      0Cr25Ni20 Oxidation resistance is better than 0cr23ni13. Mostly used as heat resistant steel
      0Cr17Ni12Mo2 Seamless stainless steel tubes for boiler and heat exchanger
      1Cr18Ni12Mo2Ti Seamless stainless steel tubes for boiler and heat exchanger
      0Cr18Ni12Mo2Ti Seamless stainless steel tubes for boiler and heat exchanger
      A-29 1025 General use carbon steel rod
      1025 These products have been used typically for use in fabrication of fittings, but usage is not limited to such applications. These products are not typically used for deep forming or cupping operations.
      標簽: NiCr20TiAl、NiCr20TiAl鋼材、NiCr20TiAl材料
      全球鋼材百科網
      日韩人妻无码中文字幕视频| 久久久久亚洲精品中文字幕 | 亚洲中文字幕无码爆乳av中文 | 日韩精选无码| 欧美日韩亚洲中文字幕二区| 无码国产精品一区二区免费式芒果| 无码国产亚洲日韩国精品视频一区二区三区| 无码精品A∨在线观看中文| 亚洲爆乳精品无码一区二区三区| 伊人久久大香线蕉无码麻豆| 国产成人无码区免费内射一片色欲| 精品无码人妻一区二区三区不卡| 亚洲AV无码一区二区三区牛牛| 精品人体无码一区二区三区| 中文无码字慕在线观看| 亚洲人成国产精品无码| 亚洲av无码成h人动漫无遮挡| 天堂а在线中文在线新版| 亚洲AV无码码潮喷在线观看| 色欲狠狠躁天天躁无码中文字幕| 日韩AV无码久久一区二区| 中文精品人人永久免费| 亚洲精品无码久久毛片| 无码人妻精品一区二区三区东京热| 五月天中文字幕mv在线| 国产亚洲精久久久久久无码AV | 日韩乱码人妻无码中文字幕视频| 韩国19禁无遮挡啪啪无码网站| 伊人久久无码中文字幕| 18禁裸乳无遮挡啪啪无码免费| 亚洲桃色AV无码| 中文字幕一区二区三区乱码| 最新中文字幕av无码专区| 狠狠躁狠狠躁东京热无码专区| 无码人妻精品一区二区蜜桃网站| 天堂…中文在线最新版在线| 国产亚洲精品无码专区| 精品无码一区二区三区亚洲桃色| 亚洲热妇无码AV在线播放| 中文字幕日韩欧美一区二区| 亚洲中文字幕无码久久综合网|